CHINESE/ENGLISH

Ultrasonic NDT
Contact Us

  • 400-022-9917

      

Ultrasonic NDT
current location : HOME PAGE > Ultrasonic NDT> Elcometer Ultrasonic Thi...

PTG6 Precision Thickness Gauge

consult

When precision is key, the PTG6 has a measurement range of 0.15mm (0.006”) to 


25.40mm (1.000”) with ±1% accuracy, across three measurement modes, Interface

Echo (I-E), Echo-Echo (E-E), and Plastic Mode (PLAS). This gauge allows users to

take measurements with pinpoint accuracy.

Calibration Options

The PTG6 has a number of calibration options. Using an uncoated sample of test material of a known thickness, the gauge can be calibrated using 1-Point calibration. Alternatively, the user can select one of 39 pre-set materials stored within the gauge including; aluminium, steel, stainless steel, cast iron, plexiglass, PVC, polystyrene and polyurethane.

The PTG6 also offers the additional calibration options of 2-Point & Velocity.

Data Output

Compatible with ElcoMaster® software, individual readings can be downloaded via USB to PC or similar device for further analysis.

 

PTG6 Precision Thickness Gauge

Features:

  • Interface Echo (I-E) Echo-Echo (E-E) ) & Plastic Mode (PLAS) measurement modes
  • Measurement range from 0.15mm (0.006") to 25.40mm (1.00")
  • 2-Point, 1-Point, Material, Thickness Set and Factory Calibration options
  • User selectable measurement rate; 4,8,16 readings per second
  • User selectable reading resolution; 0.1mm (0.01") or 0.01mm (0.001")
  • USB output to ElcoMaster®

Select a transducer

 

Interface Echo (I-E) Measurement Mode Echo Echo (E-E) Measurement Mode Plastic Mode (PLAS) Measurement Mode Measurement Rate of 4Hz Measurement Rate of 8Hz Measurement Rate of 16Hz 

 

Pre: UG20DL Underwater Th...

Next: PTG8 Precision Thick...