-
400-022-9917
The Elcometer 130 quickly and accurately measures the level of soluble salts on surfaces over 4 times faster than Bresle equivalent test methods.
- Large buttons ideal for gloved hands
- Easy to use menus in multiple languages
- High reading limit indicator
- Factory calibrated for immediate use
Accurate
- Conductivity measurement to ±1%
- Can be used in accordance with National and International Standards
- Automatic temperature compensation ensures repeatable, accurate results
- Calibration verification tiles
- Trend and batch readings graph formats for instant on-screen analysis
Reliable
- Repeatable and reproducible measurements
- 2 year gauge warranty
- Supplied with fully traceable Test Certificates
- Batch & individual readings are stored with date and time stamp
Tough
- Heavy duty, impact resistant, dust and waterproof design equivalent to IP64
- Wipe clean sealed unit ideal for harsh environments
- Scratch and solvent resistant display
Efficient
- Instant readings allows multiple tests to be completed efficiently
- Alpha numeric batch identification
- Compatible with ElcoMaster® and ElcoMaster®Mobile App
- Calibration offset allows the use of non-pure water up to 2μg/cm²
Powerful
- Measuring range up to 50μg/cm² (3000ppm)
- USB and Bluetooth® data output to iPhone* or Android™ devices
- Stores up to 100,000 readings in 1,000 batches
- Soluble salt and conductivity meter in one gauge
Key features of the Elcometer 130 Salt Contamination Meter include:
- Fast reading rate allows multiple tests to be completed efficiently
- Automatic temperature compensation ensures accurate results
- Pressure plate ensures a constant and uniform pressure to paper
- Non-oxidising gold plated contacts ensures lifetime accuracy
- Fully portable hand-held, ergonomic design ideal for use in the field
- Dust and water resistant rugged design equivalent to IP64
- Stores up to 100,000 readings in 1,000 alpha numeric batches
- USB and Bluetooth® data output to ElcoMaster® software
How to use a Salt Contamination Meter
 |
Fill the syringe with 1.6 ml of high purity water. Note: Non-pure water (up to 2µg/cm²) can be automatically offset with the gauge. |
 |
Using tweezers, remove a filter paper from the pack and place it on the cleaned, non labelled side of the magnetic disc supplied. Disperse the water from the syringe, evenly across the whole of the filter paper and remove any bubbles from under the paper. |
 |
Place the magnetic disc, with wetted paper face down on to the area under test, pressing firmly into any contours or irregularities and start the 2 minute timer on the gauge. Whilst waiting for the sample time to elapse, additional tests can be prepared. |
 |
After 2 minutes, carefully remove the filter paper and magnetic disc from the test surface and place on to the measurement electrodes. |
 |
Close the lid, ensuring that the magnetic catch is fully engaged. The reading will automatically be displayed and stored into memory together with date and time. |
 |
Place the filter paper in a resealable bag (supplied), if required for further analysis. |
Pre: None
Next: Elcometer 130 SSP So...